Knoxville Plantation Shutters Easy To Install

Plantation shutters enhance the appearance of your home. They provide the benefit of extra privacy and shade while still allowing good ventilation in a room. They are sold in kit form with instructions. Most capable DIY enthusiasts will find Knoxville plantation shutters straight forward to install.

Before you get to work on installing your new window covering, make sure the area is clear of unnecessary things and place a dust sheet on the ground. Gather all the necessary tools like small hammer, drill, spirit level, screwdriver and marking pencil. Unpack the kit and lay the components out systematically so that they are all accessible.

Good quality shutter kits will include instructions. They are usually packed in two sections. One holds the panels and the other holds the framework for the panels. Unpack both sections and lay all the parts out on the dustsheet. Place the frame on the floor with the hinges facing down.

The miter joints of the frame fit together neatly. Hammer the shutter fixings gently. Make sure you have a piece of scrap card in place to prevent damage.

Place the frame in position against the window. Use your spirit level to make sure it is level. Mark this place carefully. Screw the frame in place at the center point of the upper part. Make sure it is square before you continue.

It is important that you follow the instructions in the order given. Lift the panel to the window and place the pin into the hinge. The panels will move easily and no metal bits will be visible when they are correctly fitted. Now you can screw the rest of the screws in place.

The slatted screens allow sufficient daylight in a room. Knoxville Plantation shutters are a good investment as they give your home that added ambiance and increase the value of your home at the same time.